HOTPLATE & STIRRING HOTPLATE CERAMIC TOP PLATE
Keterangan
HOTPLATE & STIRRING HOTPLATE CERAMIC TOP PLATE
made in Torrey Pines Scientific - USA
Model HP 11 and HS11
Product Description:
Each hot plate is made with a cast aluminim chassis that is painted with chemically resistant epoxy paint.
The chassis is designed to keep spills out of the case.
Heating and stirring controls are solid state with individual indicator lights which illuminate when either is activated.
The controls are well forward of the heater surface to prevent accidental burns. Additionally, the solid ceramic heater plate is framed in cast aluminum and is designed to keep heat from the edge of the heater plate. .
The stirrer features a solid state control capable of stirring an aqueous solution from 100 to 1500 rpm.
The control has an OFF position fully counter-clockwise, and is continuous over 270 degrees of rotation from minimum to maximum speed when turned on.
The magnet is a circular disc with twenty pound pull strength and is capable of stirring more than two liters of aqueous solution.
The heater control has OFF, LO, and HIGH positions for quick setting, and a smooth infinite control of about 270 degrees between LO and HIGH settings.
The control will regulate a set point to ± 2.5° C.
Control knobs are specially selected to provide easy use and positive, tactile feel.
All units are fused, and have a 3-foot long detachable AC line cord with a male plug that matches the local standard.
The warranty is 12 months.
Product Specification:
Hot Plate: Solid ceramic
Maximum temperature of the plate surface Ceramic: 450° C
Time to maximum temperature, unloaded Aluminum: 10 minutes
Ceramic: 3 minutes
Temperature control eramic: = / -2.5° C
Heater power, watts HS10 & HP10: 600 watts
HS11 & HP11, Ceramic: 1400 watts
Stirrer:
Speed range unloaded 100 to 1500 rpm
Maximum load, HS10, ST10: over 2 liters
HS11 and ST11: over 10 liters
Magnet strength 20 pounds
Weight capacity on heater surface Over 22.5 kg
Electrical:
Operating voltages available 220VAC/ 60HZ, and 230VAC/ 50Hz
Power consumption HS10 and HP10: 650 watts
ST10 and ST1: 100 watts
HS11 & HP11: 1450 watts
HS11A & HP11A: 1250 watts
ST11: 100 watts
Additional Information:
Unit size HS10, HP10 and ST10: 33cm deep by 22.9cm wide by 8.9cm tall
PT. SUMBER UTAMA KIMIA MURNI
Ruko Klampis Square C-29
Surabaya 60117
TLP : 031-5914004
